- Heavy gauge pressed steel two-piece housing is crimped together at the bolt holes & has a rust-proof plated finish
- Bearing inserts are encased in an extra thick, non-conductive oil resistant rubber liner which corrects up to a 2° misalignment while reducing vibration & noise
- Ball bearing is pre-lubricated & made to ABEC-1 tolerances
- Wide inner race locks securely to the shaft with two set screws
- Neoprene seal keeps contaminants out allowing for usage in wet or dry conditions more
- Heavy gauge pressed steel two-piece housing is crimped together at the bolt holes & has a rust-proof plated finish
- Bearing inserts are encased in an extra thick, non-conductive oil resistant rubber liner which corrects up to a 2° misalignment while reducing vibration & noise
- Ball bearing is pre-lubricated & made to ABEC-1 tolerances
- Wide inner race locks securely to the shaft with two set screws
- Neoprene seal keeps contaminants out allowing for usage in wet or dry conditions
- Operating Temperature Range: -30° F to 200° F
View Catalog Page less
Unit of Measure
Drawing
Dimensional Drawing |
N/A
 Loading zoom Ball Bearing, Pressed Steel Housing, Self-Aligning, Heavy Gauge Type PBPH-BL - Series |
Specifications
Bore Size |
N/A 1.0000 in |
Load Capacity Dynamic |
N/A 1768 lb |
Load Capacity Static |
N/A 3153 lb |
Maximum Speed |
N/A 3500 rpm |
Bearing Style |
N/A Pillow Block |
Bearing Type |
N/A Ball |
Housing |
N/A Pressed Steel |
Approximate Weight |
N/A 1.100 lb |
UPC Code |
N/A 044861015674 |
Bore Tolerance |
N/A +0.0005 / +0.001 in |
Shaft Locking Method |
N/A 2 Set Screws |
Tolerance Class |
N/A ABEC-1 |
Mounting Bolts Required |
N/A 2 |
