Single-taper, self-centering design with mounting flange for use in through-bored components. Mounted component remains fixed axially during installation.
View Catalog Page
View Catalog Page
Unit of Measure
Specifications
Shaft Size |
N/A 340 mm |
d |
N/A 13.386 in |
D |
N/A 16.732 in |
D1 |
N/A 17.087 in |
L |
N/A 2.913 in |
L1 |
N/A 3.228 in |
L2 |
N/A 4.016 in |
L3 |
N/A 4.803 in |
Mt |
N/A 191,462 ft-lbs |
Fax |
N/A 343,280 lbs.F |
Ps |
N/A 23,349 psi |
Ph |
N/A 18679 psi |
| DN1 | N/A 26.025 in |
Locking Screws Quantity |
N/A 21 |
Locking Screws Size |
N/A M20 x 50 |
Ma-Locking Screws |
N/A 509 ft-lbs |
Hub Machining Tolerance |
N/A 0.004 in |
Shaft Machining Tolerance |
N/A -0.003 in |
Weight |
N/A 85.00 lb |
UPC Code |
N/A 044861058411 |
- 1 Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi for carbon steel and a tensile yield point = 30,000 psi for stainless steel. For details see Hub Strength in Technical Inform
