Double-taper, non-self-centering design for use in counter-bored components. Mounted component remains fixed axially during installation.
View Catalog Page
View Catalog Page
Unit of Measure
Specifications
Shaft Size |
N/A 70 mm |
d |
N/A 2.756 in |
D |
N/A 4.331 in |
L |
N/A 0.945 in |
L1 |
N/A 1.102 in |
L2 |
N/A 1.496 in |
Mt |
N/A 2,138 ft-lbs |
Fax |
N/A 18,951 lbs.F |
Ps |
N/A 11,749 psi |
Ph |
N/A 7397 psi |
| DN1 | N/A 5.571 in |
Locking Screws Quantity |
N/A 14 |
Locking Screws Size |
N/A M10 x 25 |
Ma-Locking Screws |
N/A 32 ft-lbs |
dB-Locking Screws |
N/A M12 |
Hub Machining Tolerance |
N/A 0.003 in |
Shaft Machining Tolerance |
N/A -0.003 in |
Weight |
N/A 2.70 lb |
- 1 Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi for carbon steel and a tensile yield point = 30,000 psi for stainless steel. For details see Hub Strength in Technical Inform
