Single-taper, self-centering design with mounting flange for use in through-bored components with smaller pitch/outside diameters. Mounted component remains fixed axially during installation.
View Catalog Page
View Catalog Page
Unit of Measure
Specifications
Shaft Size |
N/A 90 mm |
d |
N/A 3.543 in |
D |
N/A 4.409 in |
D1 |
N/A 5.394 in |
D2 |
N/A 5.669 in |
L |
N/A 2.559 in |
L1 |
N/A 3.386 in |
L2 |
N/A 3.780 in |
L3 |
N/A 4.173 in |
Mt |
N/A 6,733 ft-lbs |
Fax |
N/A 45,605 lbs.F |
Ps |
N/A 13,341 psi |
Ph |
N/A 10720 psi |
| DN1 | N/A 5.622 in |
Locking Screws Quantity |
N/A 12 |
Locking Screws Size |
N/A M10 x 25 |
Ma-Locking Screws |
N/A 61 ft-lbs |
Hub Machining Tolerance |
N/A 0.003 in |
Shaft Machining Tolerance |
N/A -0.003 in |
Weight |
N/A 9.00 lb |
UPC Code |
N/A 044861077511 |
- 1 Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi. For details see Hub Strength in Technical Information.
