Single-taper, self-centering design with mounting flange for use in through-bored components with smaller pitch/outside diameters. Mounted component remains fixed axially during installation.
View Catalog Page
View Catalog Page
Unit of Measure
Specifications
Shaft Size |
N/A 110 mm |
d |
N/A 4.331 in |
D |
N/A 5.512 in |
D1 |
N/A 6.614 in |
D2 |
N/A 6.850 in |
L |
N/A 2.756 in |
L1 |
N/A 3.701 in |
L2 |
N/A 4.213 in |
L3 |
N/A 4.685 in |
Mt |
N/A 12,290 ft-lbs |
Fax |
N/A 68,108 lbs.F |
Ps |
N/A 15137 psi |
Ph |
N/A 11894 psi |
| DN1 | N/A 7.226 in |
Locking Screws Quantity |
N/A 12 |
Locking Screws Size |
N/A M12 x 30 |
Ma-Locking Screws |
N/A 107 ft-lbs |
Hub Machining Tolerance |
N/A 0.003 in |
Shaft Machining Tolerance |
N/A -0.003 in |
Weight |
N/A 15.00 lb |
UPC Code |
N/A 044861077627 |
- 1 Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi. For details see Hub Strength in Technical Information.
