Single-taper, self-centering design with mounting flange for use in through-bored components with smaller pitch/outside diameters. Mounted component remains fixed axially during installation.
View Catalog Page
View Catalog Page
Unit of Measure
Specifications
Shaft Size |
N/A 14 mm |
d |
N/A 0.551 in |
D |
N/A 0.906 in |
D1 |
N/A 1.299 in |
D2 |
N/A 1.496 in |
L |
N/A 0.551 in |
L1 |
N/A 0.945 in |
L2 |
N/A 1.083 in |
L3 |
N/A 1.240 in |
Mt |
N/A 50 ft-lbs |
Fax |
N/A 2,191 lbs.F |
Ps |
N/A 19,127 psi |
Ph |
N/A 11643 psi |
| DN1 | N/A 1.180 in |
Locking Screws Quantity |
N/A 4 |
Locking Screws Size |
N/A M4 x 10 |
Ma-Locking Screws |
N/A 3.7 ft-lbs |
Hub Machining Tolerance |
N/A 0.002 in |
Shaft Machining Tolerance |
N/A -0.002 in |
Weight |
N/A 0.34 lb |
UPC Code |
N/A 044861077535 |
- 1 Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi. For details see Hub Strength in Technical Information.
