Single-taper, self-centering design with mounting flange for use in through-bored components with smaller pitch/outside diameters. Mounted component remains fixed axially during installation.
View Catalog Page
View Catalog Page
Unit of Measure
Specifications
Shaft Size |
N/A 18 mm |
d |
N/A 0.709 in |
D |
N/A 1.024 in |
D1 |
N/A 1.654 in |
D2 |
N/A 1.850 in |
L |
N/A 0.709 in |
L1 |
N/A 1.280 in |
L2 |
N/A 1.555 in |
L3 |
N/A 1.791 in |
Mt |
N/A 148 ft-lbs |
Fax |
N/A 5,012 lbs.F |
Ps |
N/A 26472 psi |
Ph |
N/A 18327 psi |
| DN1 | N/A 1.577 in |
Locking Screws Quantity |
N/A 4 |
Locking Screws Size |
N/A M6 x 16 |
Ma-Locking Screws |
N/A 13 ft-lbs |
Hub Machining Tolerance |
N/A 0.002 in |
Shaft Machining Tolerance |
N/A -0.002 in |
Weight |
N/A 0.60 lb |
UPC Code |
N/A 044861077801 |
- 1 Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi. For details see Hub Strength in Technical Information.
