Single-taper, self-centering design without mounting flange for use in through-bored components. Mounted component moves axially during installation.
View Catalog Page
View Catalog Page
Unit of Measure
Specifications
Shaft Size |
N/A 5 in |
d |
N/A 5.000 in |
D |
N/A 7.087 in |
L |
N/A 1.339 in |
L1 |
N/A 1.614 in |
L2 |
N/A 2.165 in |
L3 |
N/A 2.717 in |
Mt |
N/A 14,314 ft-lbs |
Fax |
N/A 68,706 lbs.F |
Ps |
N/A 27,230 psi |
Ph |
N/A 19212 psi |
| DN1 | N/A 11.183 in |
Locking Screws Quantity |
N/A 9 |
Locking Screws Size |
N/A M14 x 40 |
Ma-Locking Screws |
N/A 140 ft-lbs |
Hub Machining Tolerance |
N/A 0.003 in |
Shaft Machining Tolerance |
N/A -0.003 in |
Weight |
N/A 11.00 lb |
UPC Code |
N/A 044861046517 |
- 1 Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi for carbon steel and a tensile yield point = 30,000 psi for stainless steel. For details see Hub Strength in Technical Inform
