Single-taper, self-centering design without mounting flange for use in through-bored components. Mounted component moves axially during installation.
View Catalog Page
View Catalog Page
Unit of Measure
Specifications
Shaft Size |
N/A 300 mm |
d |
N/A 11.811 in |
D |
N/A 14.764 in |
L |
N/A 2.362 in |
L1 |
N/A 2.638 in |
L2 |
N/A 3.346 in |
L3 |
N/A 4.055 in |
Mt |
N/A 111,726 ft-lbs |
Fax |
N/A 227,028 lbs.F |
Ps |
N/A 21,585 psi |
Ph |
N/A 17268 psi |
| DN1 | N/A 22.123 in |
Locking Screws Quantity |
N/A 18 |
Locking Screws Size |
N/A M18 x 50 |
Ma-Locking Screws |
N/A 299 ft-lbs |
Hub Machining Tolerance |
N/A 0.004 in |
Shaft Machining Tolerance |
N/A -0.003 in |
Weight |
N/A 80.00 lb |
UPC Code |
N/A 044861058244 |
- 1 Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi for carbon steel and a tensile yield point = 30,000 psi for stainless steel. For details see Hub Strength in Technical Inform
