Single-taper, self-centering design with mounting flange for use in through-bored components. Mounted component remains fixed axially during installation.
View Catalog Page
View Catalog Page
Unit of Measure
Specifications
Shaft Size |
N/A 200 mm |
d |
N/A 7.874 in |
D |
N/A 10.236 in |
D1 |
N/A 10.591 in |
L |
N/A 1.732 in |
L1 |
N/A 2.008 in |
L2 |
N/A 2.559 in |
L3 |
N/A 3.110 in |
Mt |
N/A 37,569 ft-lbs |
Fax |
N/A 114,510 lbs.F |
Ps |
N/A 22,269 psi |
Ph |
N/A 17130 psi |
| DN1 | N/A 15.283 in |
Locking Screws Quantity |
N/A 15 |
Locking Screws Size |
N/A M14 x 40 |
Ma-Locking Screws |
N/A 170 ft-lbs |
Hub Machining Tolerance |
N/A 0.003 in |
Shaft Machining Tolerance |
N/A -0.003 in |
Weight |
N/A 23.00 lb |
UPC Code |
N/A 044861004920 |
- 1 Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi for carbon steel and a tensile yield point = 30,000 psi for stainless steel. For details see Hub Strength in Technical Inform
