Single-taper, self-centering design with mounting flange for use in through-bored components. Mounted component remains fixed axially during installation.
View Catalog Page
View Catalog Page
Unit of Measure
Specifications
Shaft Size |
N/A 240 mm |
d |
N/A 9.449 in |
D |
N/A 12.008 in |
D1 |
N/A 12.362 in |
L |
N/A 1.969 in |
L1 |
N/A 2.244 in |
L2 |
N/A 2.874 in |
L3 |
N/A 3.504 in |
Mt |
N/A 62,234 ft-lbs |
Fax |
N/A 158,073 lbs.F |
Ps |
N/A 22,543 psi |
Ph |
N/A 17739 psi |
| DN1 | N/A 18.216 in |
Locking Screws Quantity |
N/A 15 |
Locking Screws Size |
N/A M16 x 45 |
Ma-Locking Screws |
N/A 262 ft-lbs |
Hub Machining Tolerance |
N/A 0.003 in |
Shaft Machining Tolerance |
N/A -0.003 in |
Weight |
N/A 34.00 lb |
UPC Code |
N/A 044861058367 |
- 1 Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi for carbon steel and a tensile yield point = 30,000 psi for stainless steel. For details see Hub Strength in Technical Inform
