Single-taper, self-centering design with mounting flange for use in through-bored components with smaller pitch/outside diameters. Mounted component remains fixed axially during installation.
View Catalog Page
View Catalog Page
Unit of Measure
Specifications
Shaft Size |
N/A 25 mm |
d |
N/A 0.984 in |
D |
N/A 1.339 in |
D1 |
N/A 1.969 in |
D2 |
N/A 2.205 in |
L |
N/A 0.984 in |
L1 |
N/A 1.575 in |
L2 |
N/A 1.850 in |
L3 |
N/A 2.087 in |
Mt |
N/A 308 ft-lbs |
Fax |
N/A 7,518 lbs.F |
Ps |
N/A 20585 psi |
Ph |
N/A 15136 psi |
| DN1 | N/A 1.899 in |
Locking Screws Quantity |
N/A 6 |
Locking Screws Size |
N/A M6 x 16 |
Ma-Locking Screws |
N/A 13 ft-lbs |
Hub Machining Tolerance |
N/A 0.002 in |
Shaft Machining Tolerance |
N/A -0.002 in |
Weight |
N/A 1.31 lb |
UPC Code |
N/A 044861077757 |
- 1 Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi. For details see Hub Strength in Technical Information.
